GLT Labtech

Connect the tube system and place the outflow pipe into the dosage arm.  Place the carrousel holder onto the weighing plate and set the fill weight and the number of test tubes to be filled.  Press START, the dosage arm will turn all the way to the left. Now place the carrousel with the test tubes into the carrousel holder and press the start button. The dosage arm turns above the middle ring and the pump doses the exact set amount of liquid into the first test tube. The carrousel will then move to the next test tube and dose again. This operation will be repeated until the last test tube of the middle ring is filled.

The dosage arm will then turn above the second ring and then the third and finally the fifth ring (up to a maximum of 114 test tubes). When the set number of test tubes has been filled, the dosage arm will then turn to the maximum left position and the carrousel may be removed.

The video below will give you a clearer picture regarding this function: